aspire speeder – AtouchMall Blog

The first image in your head about Aspire maybe the Nautilus, very hot and perfect performance. Even there are no so hot products like Nautilus , Aspire’s products also have a good reputation in the market

This time we are here take a look at a aspire new starter kit – Aspire Speeder 200w kit

【Out Look】

The appearance of this mod is tightly with the trend – Apple style, and it use of a full symmetry design, the mod’s material is aluminum alloy and zinc alloy, the middle of the gold parts for the aluminum alloy, anodized paint, White parts for the zinc alloy material, matte pearl paint (common high-end cars). There is no rough rounded fuselage to make it feel very comfortable holding.

The middle of the black glass at the integrated 0.96inch display and “+” “-” adjust button, under the adjustment button is the USB port (charge and also be used as a firmware upgrade). Fire button placed in the left side mod of the aspire logo under the 2/3 place , which means that no matter what grip can easily press the fire button. The bottom is the battery compartment cover.

The appearance of the tank is similar to the Nautilus 2 atomizer, there is a layer of aluminum alloy outside the glass tube. The main body of the atomizer has a diameter of 25mm. Since the drip tip can not be replaced, the height of the 510 interface is 54mm. The color is the same as the mod body.

【Mod details】

The top of the mod is 510 adaptive electrode scratch plate diameter of 16mm, higher than the mod plane 0.06mm (manual measurement, may be biased), if the bottom of the atomizer is more flat will not wear the top of the host paint.

The screen is equipped with automatic flip function, according to the direction of the grip automatically adjust the screen display direction

The gap around the screen and the adjust button is uniform, high precision. However, because the screen and adjust the button panel are both glass material, it is easy to contaminate by the fingerprint.

The fire button is width of 12mm, height 68mm, paint and feel comfortable, laser carving aspire words looks very cool.

Battery cover with clamshell design, use of spring card lock cover. There is a word of eight hanging pressure hole on the cover. As the buckle with a slope design, just force under pressure is ok.

The inside of the cover is also pasted with an insulating film to reduce the risk of using a broken battery. Positive and negative mark clear, the cover inside is plastic insulation material, flexible battery contacts, the components are tightly connected, and the gap is uniform, enough to show its excellent technology.

【Atomizer Details】

The atomizer can rebuildable for 7 parts:Drip tip,top cap,metal tube with refill channel,glass tube,coil,base and airflow ring

The top of the drip is designed with a non-universal interface between the top cover and the nozzle, but the combination of the two creates a recessed space that effectively blocks the condensate and prevents the condensate from entering.

Top cover with multiple seals to ensure air tightness, but it is worth noting that the top cover and the oil ring between the connection thread and did not use metal material, the need to pay attention to the installation of threaded counterparts, to avoid the situation of the sliding teeth.

The former also mentioned, the refilling ring also connect a metal outside tube, the external laser carved aspire LOGO, can be used to protect the glass tank is not broken (too much or sharp objects through the window to see the glass tank except). The central airway diameter of 10mm, which shows its horrible air circulation capacity.

Although the diameter and width of the injection hole is smaller than the current mainstream nebulizer, it is itself in a 2mm deep groove, which also ensures that the oil will not overflow because the pores are too small.

Glass tank outside the diameter of 23mm, height 32mm, although it looks big, because of the larger volume of the atomizer core, the actual apace for ejuice is not very big

There are two type of the coils. A3 0.3ohm ,recommend watt is 60-75w, suitable for low vital capacity and want to enjoy a big smoke. A5 0.16ohm,recommend is 100-120w, more suitable for big airflow and smoke vapors

From here we can see that Aspire has a big confidence of their coil technology. For myself, I very love their taste coils,very pure. Gig smoke coil need try in the next. I also have confident of Aspire

【Performance 】

The mod chip technology has also been quite good, with power mode, voltage mode, mechanical mode, custom power curve mode, temperature control mode and TCR mode.

Power output range: 1-200W.
Voltage output range: 0.1-8.4V.
Temperature adjustable range: 200-600 ° F (100-315 ° C).
Mechanical mode output: two battery current series voltage push.
Custom power curve mode, curve point time interval of 0.5S.

Two battery power alone show, so that players understand the current state of the battery, in addition to a balanced charging function, the process of charging will show the battery voltage and charging time.

【Last】

As a high-value starter kit, the speeder 200w of industrial design and external surface treatment process is very good. More, the output is not a weak phenomenon, grip and operation experience feel more comfortable, in general, is a nice starter kit.

EU / UK Buy More here: