If ijoy can challenge of the traditional 18650 or not? Dual 20700 mod captain PD270 review


iJoy Captain PD270 Mod

As we know,the most popular li-battery for ecigs mod is 18650.In 2017,iJoy released a new type mod – 20700

Through 20700 is more powerful,more output, it is a trend of the future,it can let one product raise from amount of traditional 18650 mods,it also need time to text.

From the sales, the iJoy Captain PD20700 is a very good products

Most,is this 20700 one can be a popular trend in the future??



The iJoy Captian PD20700 use the double paper package with green and blue which it means “Technology” and “Health”


The side shows the most best 4 features:234W max output,dual 20700,0.96inch display,updateable

PD270- “P”for high quality,”D”for dual,”270” for 20700 battery; iJoy believes that the 20700 will take the place of the 18650 in the future e-cigarette market

【Notice for the package】

1.It can match use of the 18650 battery with translate parts

2. 2*20700 battery is include

3. the lowest  resistance is 0.05ohm,can match most of the wire in the market

4. This iJoy Captain PD20700 has black,gun metal and rainbow colors. This review is for rainbow color.


The package include 1*USE cable for charge and update connection with PC. 2*20700 batteries,warranty card,user manual.

【Out Look】

Out look.1

The iJoy Captain PD20700 mod’s size is about 90mm L,48mm W,32mm H, mod is rainbow color,mid is display screen and adjust button and USB port. The side is Carbon fiber patch

Out look.2

The fire button is on the side, his size is about 20x23mm


The 0.96inch screen display many items, like output watt,battery power,resistance,output voltage,output current,mode,puffs and how long vape.

Out look.4

The back is show the model of the mod. It will be much more cooler if it use the lighting logo design by myself.

Out look.5

The battery store is at the bottom , press and pull it will be open it.

Inside the battery cover with positive and negative identification, the installation of the battery should pay attention to the corresponding mark

Out look.6

The battery cover also with A, B battery slot mark, if the battery has an exception can be screened on the corresponding screen distinction.

In addition to the bottom of the battery cover in addition to the contact of the two batteries, the bottom also has a contact in the lid after the cover with the bottom of the spring electrode connected to form a loop.

Out look.8

The 20700 battery is 3.7V,3000mah and 40A. Total capacity is 11.1Wh. In technically , the 20700 is higher capacity and output current. But there are still many 18650 battery can up to 3000mah or higher

Out look.9

The 20700 battery is about 20.2mm diameter and 70mm length. It is a little bigger than the 18650,not that bigger than your imagination

【Function Set】


The iJoy Captain PD270 settings are relatively simple, continuous press the fire button 3 times to enter the graphical settings menu, which has power mode, temperature control mode, TCR, set, vape port number zero icon, press the two adjustment button to move the pointer, Press the fire button to enter the relevant setting function.

● Power mode ● provides NORMAL, HARD, SOFT three output effects, but also with “USER” user-defined output function, which is often said that “custom output curve.”

● Custom output curve ● The output power can be changed in the power output mode.
For example, such as 0.15Ω resistor should be 90W, the use of custom curve can be raised to the first grid power to 120W, this will increase the explosive force of the coil, rapid warming.
Then set to 90W normal output, the rest of the order is set to power down, the formation of a gradual decline in the output curve, to avoid the coil continued to rise to produce burned flavor.

● Custom output curve ● The model is more suitable for use with DIY coil, both to make up for the lack of preheating, but also to avoid high power continuous power supply caused by vape overheating or burned coil.
CaptainPD270 provides a 3-second time curve set, divided into six set nodes, each node corresponds to 0.5 seconds.

It is worth mentioning that, CaptainPD270 custom model using the “percentage” curve, rather than the specific “power value.”

In simple terms, each time the button is pressed, it will increase or decrease by 10% depending on the currently set output power. The advantage of this setting is that if you replace the different atomizer, the user only needs to adjust the current output power, the chip will automatically calculate the output power of each node according to the curve, no longer set to continue to use their own custom output curve.

● temperature control mode ● contains the current mainstream of nickel, titanium, stainless steel three kinds of temperature control output, also with two custom TCR output mode, call the TCR function inside the settings.
In the temperature control interface, CaptainPD270 adjustment is also very convenient, to the screen prevail, press the left “-” button, the screen below the temperature setting will flash, and then press the two adjustment keys to increase or decrease the temperature set set.

If you press the “+” button on the right side, the power setting at the top of the screen will flash and adjust the power value at the current temperature with two adjustment button.

TCR menu contains M1 and M2 two sets of values, through the fire button switch, adjust the button to adjust, you will use the temperature control material TCR value input to the corresponding group, adjust the button after the fire button to move to EXIT Press the adjustment key to exit the setting. If you want to call this set of settings, in the temperature control mode to select the corresponding M1 or M2.
SET setting is actually set only when the screen is cast, providing 4 times from 10 seconds to 90 seconds.

【Actual Use】


Vape smoke of the DIY dual 0.5ohm coil

CaptainPD270 performance in the impressive, no delay fire, the output stability, with 20700 best advantage in the high-power output under the high endurance.


I actually experience the use of the power to 60W, from the first day of noon to use the next afternoon to run out of power, the mod records the use of the vape puffs is 752, than the dual 18650 mod in the high power output time to increase much.
This is a great benefit for big smoke likers, liek me , you can avoid frequent replacement of the battery, even if you do not have to carry the spare battery, full of electricity even after the big smoke output can also adhere to the day, when sleeping on the battery charge.
When using the USB interface to charge, according to the icon displayed can be seen, the chip supports double power balance charge, which for the extension of the battery life is still very good.


For the weight, CaptainPD270 stand-alone weight of about 165g, double 20700 battery weighs about 115g, install the battery and atomizer full load of about 332g, with dual 18650 battery weighs about 327g, it is not much diffrent for each, so the portability is not bad.

IJOY also for CaptainPD270 prepared dozens of different patterns of stickers for users to buy replacement, to create a more personalized appearance.

【About Charge】


For “20700” battery, I believe many of my friends are concerned about the traditional charger is to support this new size or not. in fact, 20700 is only 5mm longer than 18650’s, As my experimented with nitecore and several other brands of chargers, as long as it is the use of a spring-adaptive electrode, basically compatible with the 20700 battery, the two battery charging voltage is no difference, so long as you can put the charger, you can charge.
Some fixed electrode charger, the maximum support only 65mm battery, it can not charge the 20700 battery.



In the current, there are so many high-power electronic cigarette mods, so many are lack of innovation , the 20700 battery is undoubtedly a good innovation .Addition to CaptainPD270, iJoy there are a variety of 20700 mechanical mod will be released in the future, we can see how confidence of IJOY for 20700.

【Your voice】

What do you think about the 20700??

● performance is stronger than 18650, will become the new trend of electronic cigarette!

● performance is not very different, for the electronic cigarette, it is not too much meaning.

● 18500 18450 18350 26650 failed to kill 18650, the 20700 also can’t

● nothing to say, I only use 18650!

More you can buy (UK/EU Amazon):


US buy here:

iJoy Captian PD270 Mod

iJoy Cambo RDTA 2

Warm Tip: Because each person’s experience is different, this article represents only the author’s personal point of view, for reference only!

Quick review of Wismec RX Gen3 300w Starter Kit

Reuleaux RX GEN3
wismec rx gen3.5

the third generation of Reuleaux box mod, is smaller, lighter and more ergonomic than previous versions. Having a big 1.3inch OLED screen and brand-new interface, the GEN3 comes with three replaceable 18650 cells whose maximum output can reach 300W


-Size: 39.3*48.8*113.7mm
-Weight: 197.7g
-E-liquid Capacity: 2ml/4ml
-Thread Type: 510 spring loaded connector
-Cell Type: high-rate 18650 cell (discharging current should be above 25A)
-Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR mode
-Output Wattage: 1-300W
-Resistance Range: 0.05-1.5ohm for TC modes
-0.1-3.5ohm for VW mode
-Temperature Range: 100-315°C/200-600°F (TC modes)
-Maximum Charging Current: 2A
-Maximum Output Current: 50A
-Output Voltage Range: 0.5-9V

wismec rx gen3.3

Still, he use three 18650 batteries . But, he is more powerful than the RX200 / RX200S and more lighter and smaller

wismec rx gen3.6

RX GEN3 Atomzier is a new tank top fill with new WM coils and it can be use RBA base; He has 3 types of coils:
WM01 single 0.4ohm: 40-80w; Best watt:55-65w

WM02 dual0.15ohm: 30-70w; Best watt:45-60w
WM03 dual0.2ohm: 40-130w; Best watt:70-90w

This can match your need and tastes , good idea for users

wismec rx gen3.4

From my experience, it is a new generation edition but maybe can’t be a classic like RX200/RX200S Mod. It is like a update and can’t say it is a new feel of use.
So, if your RX200/RX200S is stop working or you want to try a new smaller one, try this Wismec RX Gen3
More, you can buy wismec’s RX200s Mod here :

Wismec RX2 20700 Starter Kit

Month ago,we wrote i post of :


From now, we can sure that ijoy made the new trend of the 20700

Today,wismec released a new vape device – Wismec RX2 20700 Starter Kit

It’s the new edition of the RX series with 20700 type. Also, it can be work with 18650 battery with the extra tube. It can update to 200w,Stealth funciton,key lock function,stitch VW/TC-NI/TC-SS/TCR Mode

wismec rx2 20700.4

From the sample, we can know his quality material,good hand feeling,cool design ,big fire button,big display. It is the most powerful of the wismec’s products

wismec rx2 20700.9

wismec rx2 20700.7

You can open the battery door by the slip button at the bottom of the mod and see 2 extra tube, it can let you change with 20700 and 18650

Here is the details parts you can see of this rx2 20700 kit:
wismec rx2 20700.6

Packing list:
1*RX2 20700 (No cells)
1*Gnome Tank
1*WM02 Dual 0.15ohm coil head
1*WM03 Triple 0.2ohm coil head
1*QC USB Cable
1*User Manual
2*Warning card
Spare parts

wismec rx2 20700.16

As 20700 will be more popular and more popular in the future, this wismec rx2 20700 will be a new choice for your vaping

Kindly visit and inquiry us

20700 battery cell for USA:

20700 battery cell for UK/EU:

SMOKJOY SV AIO Kit – 2.0ml&1100mah

Smokjoy SV AIO Starter Kit 
adopts unique fashion design and comes with a large battery capacity of 1100mAh and liquid capacity of 2ml. The compact body measuring 69MM x 45MM x 20MM in dimension. Also equipped with the USA imported CPU and is simple enough for everyone to use. Available in two colors: Black and Red.


Input Voltage: 5V 1A
Liquid Capacity: 2ml
Battery Capacity: 1100mAh
Output Voltage: Full power 
Compatibility: 0.45-2.0ohm
Output Power: Full power output within the resistance support range
Dimensions: 46.5mm x 20.5mm x 69.5mm(W*H*T)
Color: Black, Red

Package Includes:
1 x SV AIO Mod
1 x 0.6 Coils (pre-installed)
1 x 0.6 Coils
1 x USB Charging Cable
1 x User Manual



UK / EU more to buy:

Wismec Sinuous FJ200 Kit With Divider Tank Kit

The Wismec Sinuous FJ200 Kit – 4600mah built-in battery with 200w max output, 1.3inch display with 2A quick charge;Powerful WS series coil & 2ml/4ml options

wismec sinuous fj200.0901

wismec sinuous fj200.0914

Specification Mod:
Size: 45.0*29.0*123.4mm
Weight: 264g
Atomizer Weight: 54.4g
Battery Weight: 209.7g
E-liquid Capacity: 2ml/4ml
Thread Type: 510 spring loaded connector
Output Mode: VW/TC-Ni/TC-Ti/TCSS/TCR mode
Output Wattage: 1-200W
Resistance Range: 0.05-1.5ohm for TC modes
0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 2A
Maximum Output Current: 50A
Output Voltage Range: 0.5-9V

wismec sinuous fj200.0907wismec sinuous fj200.0908wismec sinuous fj200.0910wismec sinuous fj200.0911wismec sinuous fj200.0912

Length: 46.9mm
Diameter: 25mm
Capacity: 2ml /4ml
Atomizer weight: 54.4g

wismec sinuous fj200.0902wismec sinuous fj200.0903wismec sinuous fj200.0904wismec sinuous fj200.0905wismec sinuous fj200.0906

Full kit Contents:
1 * Sinuous FJ200
1 * WS01 Triple 0.2ohm Head
1 * WS02 Triple 0.25ohm Head
1 * QC USB Cable
1 * Warning Card
2 * User Manual
Spare Parts(2 * seal ring+1*glass tube)

wismec sinuous fj200.0913wismec sinuous fj200.0915

For wholesale,contact us pls: admin@atouchmall.com


EU / UK buy more here:

Aspire Speeder 200W Kit Review

The first image in your head about Aspire maybe the Nautilus, very hot and perfect performance. Even there are no so hot products like Nautilus , Aspire’s products also have a good reputation in the market

This time we are here take a look at a aspire new starter kit – Aspire Speeder 200w kit

【Out Look】


The appearance of this mod is tightly with the trend – Apple style, and it use of a full symmetry design, the mod’s material is aluminum alloy and zinc alloy, the middle of the gold parts for the aluminum alloy, anodized paint, White parts for the zinc alloy material, matte pearl paint (common high-end cars). There is no rough rounded fuselage to make it feel very comfortable holding.

The middle of the black glass at the integrated 0.96inch display and “+” “-” adjust button, under the adjustment button is the USB port (charge and also be used as a firmware upgrade). Fire button placed in the left side mod of the aspire logo under the 2/3 place , which means that no matter what grip can easily press the fire button. The bottom is the battery compartment cover.

The appearance of the tank is similar to the Nautilus 2 atomizer, there is a layer of aluminum alloy outside the glass tube. The main body of the atomizer has a diameter of 25mm. Since the drip tip can not be replaced, the height of the 510 interface is 54mm. The color is the same as the mod body.

【Mod details】


The top of the mod is 510 adaptive electrode scratch plate diameter of 16mm, higher than the mod plane 0.06mm (manual measurement, may be biased), if the bottom of the atomizer is more flat will not wear the top of the host paint.


The screen is equipped with automatic flip function, according to the direction of the grip automatically adjust the screen display direction

The gap around the screen and the adjust button is uniform, high precision. However, because the screen and adjust the button panel are both glass material, it is easy to contaminate by the fingerprint.


The fire button is width of 12mm, height 68mm, paint and feel comfortable,  laser carving aspire words looks very cool.


Battery cover with clamshell design, use of spring card lock cover. There is a word of eight hanging pressure hole on the cover. As the buckle with a slope design,  just force under pressure is ok.

The inside of the cover is also pasted with an insulating film to reduce the risk of using a broken battery. Positive and negative mark clear, the cover inside is plastic insulation material, flexible battery contacts, the components are tightly connected, and the gap is uniform, enough to show its excellent technology.

【Atomizer Details】


The atomizer can rebuildable for 7 parts:Drip tip,top cap,metal tube with refill channel,glass tube,coil,base and airflow ring


The top of the drip is designed with a non-universal interface between the top cover and the nozzle, but the combination of the two creates a recessed space that effectively blocks the condensate and prevents the condensate from entering.

Top cover with multiple seals to ensure air tightness, but it is worth noting that the top cover and the oil ring between the connection thread and did not use metal material, the need to pay attention to the installation of threaded counterparts, to avoid the situation of the sliding teeth.


The former also mentioned, the refilling ring also connect a metal outside tube, the external laser carved aspire LOGO, can be used to protect the glass tank is not broken (too much or sharp objects through the window to see the glass tank except). The central airway diameter of 10mm, which shows its horrible air circulation capacity.

Although the diameter and width of the injection hole is smaller than the current mainstream nebulizer, it is itself in a 2mm deep groove, which also ensures that the oil will not overflow because the pores are too small.

Glass tank outside the diameter of 23mm, height 32mm, although it looks big,  because of the larger volume of the atomizer core, the actual apace for ejuice is not very big


There are two type of the coils. A3 0.3ohm ,recommend watt is 60-75w, suitable for low vital capacity and want to enjoy a big smoke. A5 0.16ohm,recommend is 100-120w, more suitable for big airflow and smoke vapors

From here we can see that Aspire has a big confidence of their coil technology. For myself, I very love their taste coils,very pure. Gig smoke coil need try in the next. I also have confident of Aspire

【Performance 】


The mod chip technology has also been quite good, with power mode, voltage mode, mechanical mode, custom power curve mode, temperature control mode and TCR mode.

Power output range: 1-200W.
Voltage output range: 0.1-8.4V.
Temperature adjustable range: 200-600 ° F (100-315 ° C).
Mechanical mode output: two battery current series voltage push.
Custom power curve mode, curve point time interval of 0.5S.

Two battery power alone show, so that players understand the current state of the battery, in addition to a balanced charging function, the process of charging will show the battery voltage and charging time.



As a high-value starter kit, the speeder 200w of industrial design and external surface treatment process is very good. More, the output is not a weak phenomenon, grip and operation experience feel more comfortable, in general, is a nice starter kit.

EU / UK Buy More here:

US Buy More here:

Aspire Speeder Kit
Aspire Athos Tank
Aspire Athos Replacement Coil

Kangertech Iken Kit

The Kangertech IKEN KIT device is built-in 5100mah battery and havs an ultra-long standby capacity with 230w power output. Equipped with a 1.54 inch TFT display screen,with IKEN Tank use the “U” airflow technology. Also, it has a multi-function mode selection interface with DIY curve on it. Black,Red,Yellow,Teal,Green and Blue colors

KANGERTECH IKEN KIT.2Kangertech Iken kit.3


Size: 44 x 42 x 78mm
Battery capacity: 5100mAh
Output wattage: 1 – 230W
Mode: VW/TC(Ni, Ti, SS)/TCR (M1, M2)
Display:  1.54-inch TFT color screen
Resistance range:  0.1 – 5ohm
Temperature Control range: 100℃-300℃/200F-600F
Depth of 510 pins applicable: 5 – 7mm
Thread: 510 thread

Size: 24mm x 36mm
Capacity:  4ml
Thread: 510 thread

kangertech iken blue

Kangertech Iken Full Kit Contents:

  • 1x IKEN MOD
  • 1x IKEN Tank
  • 2x SSOCC 0.2ohm Head (25 – 60W)
  • 1x USB cable
  • 1x Manual

Here is the video:

As I didn’t have the sample,from the picture,we can see that big size. Maybe it is not good for outside. But it is beautiful color ,big fire button and suitable the SSOCC coil will makes more acceptable

It has the value to try

What do you think??

UK / EU can buy here:

USA can buy more here:
Kangertech K-Pin Starter Kit
Kangertech Subox Mini-C Starter Kit

Wotofo Stentorian AT-7 100W Transparent Box Mod Review

Wotofo Stentorian AT-7 Mod


There is a topic when I talk with friend these days – what is the vapers actually need for e-cigarettes??

As so many suppliers offer the same high quality and good performance,vapers don’t do more attention on the device performance so much. The e-cigs technology is already very mature

Now,the normal single battery mod up to about 80w, dual batteries mod up to 200w, Ni,Ti,SS, custom curved TCR…ect, this almost to be a standerd. So many products offer customers more choice. But for manufactory, how to do more Personal to stand out from so many ones is a big problem

More and more young vapers come for vape makes mod more different, personal,technology,cool to needed. Just like the computer and cell phone


Cool shape and visual effects, also make a lot of electronic cigarette brand has been inspired. Smoant  “RA BOX” ray mod on the use of the relevant design elements, personalized modeling makes so many vaper who are flocking.

Recently, Stentorian released a new mod – Wotofo Stentorian – AT-7 Mod, design inspiration comes from “water-cooled chassis”. There are so many fans on Ins and it called “walking in the hands of the water-cooled chassis”.

Is it real for “water cooled”? How are his out look and performance ??
Let’s share the review of the Wotofo Stentorian AT-7 Mod tody



The AT–7’s package is more technology,main picture is the type of the chip. the central is the number 7. You may think it is a “CPU” if you first look when it on the desk. The below is the “ALL TECH”. The side of the package is code and “Stentorian” LOGO


The background is simple content,warning , place and STENTORIAN website info


Open it and you will see the AT-7 body,”Hexagonal” shape,transport board


Take it out and you will see the user manual and USE cable.
The user manual has English,Russian,France,Denmark,Italy,Germany,Poland,Spain and Netherland language .

The manual shows:
Battery: built-in 3500mah and 5V/1A USB charger
Watt: Max 100w
Resistance: 0.1ohm – 3ohm
Longest out put protect time: 10s
Current: <30uA
Protect:10 seconds output timeout Automatic power off protection, short circuit, virtual connection protection, battery low voltage protection ect

【Out Look】


Though it looks more technology,it is a mech mod – full power out put with no adjustable watt. It will adjust when the coil resistance change. The more low resistance, the more higher of the output watt. But the highest output is 100w.

For example, for 0.1ohm coil, 3.7V output voltage, the output watt should be 137w,but the mod device only can up to 100w

The front and the background are both transport

AT-7 mod body with a “hexagonal” design, each vertex part of the use of the section shape, the fuselage on both sides of the use of curved design,fire button is located in the 510 interface with the right side of the fuselage, very large size . The fire button to occupy the entire fuselage side.

510 interface on the right side of the fuselage, the bottom of the fuselage with the mod model and STENTORIAN LOGO.
AT-7 mod length 90mm, the maximum width of 75mm, thickness of 31mm, the actual size feeling is larger than the imagination of slightly, good on both sides of the fuselage arc shape improvement the feeling, very kind for hand

Maybe you will curious about if it really can water cooling? Let’s try it.

From the pictures up,we can see that pipe not together with the board and will no liquid in it. We can sure that it can actually do the water cooling. The pipe is only for looking.

The AT-7 Mod has three LED lights. It will light when put the fire button and will off when loose it.
Led lights has white,blue,green and red. It is pity that customers can’t custom change it. It will shows the white light when full power, shows blue when 70% power. When it is red, it means the output voltage is lower than 3.2v, it need to recharge.



It is full power output mech mod,with no adjustable level.
From the pictures we can knows his output power is huge and the smoke is very big. It is some like force output like the Tesla invander 3

【My ideas】

This is  the built-in battery mod. It will not very good for ones who takes it out door. As it can’t last long and can’t change the battery. As my using, the AT-7 built-in 3500mah, almost the same as 1.5pcs of the VCT4 battery. If for 0.1ohm heavy smoke , it will last about 800 puffs and if you smoke light, it maybe can last almost one day.So,don’t worry about this
The AT–7 is build-in battery and do fast charge system for each other good performance. It supports 5V1A USB charge. It will full charge in 2hours.You can take a power bank when out side, this will be good


You may think it is a problem for leaking with this transport mod. Yes, this will be a problem. When the smoke cooling or the atomizer leaking, it will into the body. So , you need do concentrate on it when using

【Your voice】

1,Cool out looking,good price,perfect performance,will buy it
2,Can’t last long,will not buy
3,waiting for a while to see if the price will be lower,then will buy

Warm Tip: Because each person’s experience is different, this article represents only the author’s personal point of view, for reference only!

And you can buy more here(UK/EU Amazon):

US buy here:

Wotofo Serpent Mini RTA

Demon Killer 8in1 Coil

Wismec SINUOUS P80 Kit

Product Introduction
SINUOUS P80, a new flagship e-cig mod designed by sinuous designs, impresses us with its centered 510 connector and side OLED display. Powered by single 18650 cell, it reaches a mighty 80W output along with a sequence of other unique features including 2A quick charge, preheat and LED light with changeable colors. Featuring the slide-top fill solution and  childproof lock system, the Elabo mini atomizer with powerful WS coil can perfectly pairs with SINUOUS P80.


Main Features:
80W Max Output with Single 18650 Cell: Compact yet science fiction, the SINUOUS P80 is the representative of ergonomical design. Powered by single 18650 cell, the max output can reach 80W, which will completely satisfy your daily demand.

Quick Link:
Replacement Triple 0.2ohm Coil
Replacement WS01 Triple 0.2ohm

Features and Specs for Wismec Sinuous P80 Mod:

  • Designed by Sinuous Designs
  • Comfortably Fits 25mm and Smaller Tanks
  • Dimensions: 33.5mm x 28.5mm x 125mm (Including Elabo Mini)
  • Spring Loaded 510 Contact Pin
  • Operating Wattage: 1 – 80 W
  • Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
  • Temperature Control: 100 – 315C / 200 – 600 F
  • Resistance: 0.1 – 3.5 ohm in Variable Wattage
  • Resistance: 0.05 – 1.5 ohm in Temperature Control Mode
  • Preheat Functionality
  • Hidden Side Fire Button
  • 0.96″ OLED Display Screen
  • Choose From Three Different Color Indicator Lights
  • Requires (1) High Amp 18650 Battery (Sold separately)
  • Micro USB Charging Port (QC USB Cable included)
  • Maximum Charging Current: 2A
  • Firmware Upgradeable
  • Dual Circuit Protection
  • Reverse Polarity Protection

Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.


Features and Specs for Elabo Mini Sub-Ohm Tank:

  • Dimensions:
  • Diameter: 25mm
  • 510 Threaded
  • 2.0ml e-Liquid Capacity
  • Retractable Top Fill Design
  • Dual Airflow Slots
  • Large Adjustable Airflow Control Valve
  • Wismec Triple and NS Triple Atomizer Heads for Variable Wattage
  • Includes (2) Wismec WS01 Triple 0.2ohm Atomizer Head (Designed for 40 – 80 Watts)
  • 510 Drip Tip Compatible


More you can buy:

Lockenstab, iMissiu 5 in 1 Multifunktions Austauschbare Lockenwickler Kit (Schwarz)

Weitere Optionen

Diese Version von Lockenstab ist austauschbar. Es gibt insgesamt fünf verschiedene Fässer, unterschiedliche Größe kann verschiedene Frisur machen. Kleinere Fässer sind ideal für enge, federnde Locken und feinere Haare, während die dickeren Fässer Körper und Volumen schaffen. Auch gibt es eine Sperre auf den Griff, nur drücken Sie die Tasten zu ihnen gleichen Zeit, können Sie das Fass ändern, was Sie leicht mögen. Schönheitshaar kann Ihnen eine gute Stimmung bringen

Mehr bequem und einfacher

Die LED-Anzeige leuchtet, wenn das Lockenstab eingeschaltet wird, und stellen Sie den Knopf auf die gewünschte Temperatur ein. Der Fass braucht nur ca. 60S, um sich zu erwärmen. Folgen Sie der Anweisung, ein schönes Haar kann einfacher und schneller gemacht werden

Sicherheit zu verwenden

Die Schnur ist 2M, und der Stecker entspricht Europa Standard. Don muss sich keine Sorgen machen, dass der Stecker nicht passen kann. Es gibt ein Paar Handschuhe, die deine Hand schützen können, um das heiße Fass zu berühren


1 x 5-in-1 Haar Lockenwickler

1 x Schwarzer handschuh



1.Bitte lesen Sie alle Anweisungen vor dem Gebrauch

2.Halten Sie elektrische Produkte weg von Wasser. Wenn das Gerät in Wasser fällt, sofort den Netzstecker ziehen. Erreiche nicht ins Wasser

3.Sie immer nach dem Gebrauch ausziehen

4. Verwenden Sie nicht um Flüssigkeiten

5.Bitte verwenden Stand, um das Lockenstab zu halten, wenn das Fass noch heiß ist

6.Das Lockenstab ist heiß, wenn es benutzt wird. Lassen Sie keine Augen und nackte Haut berühren beheizte Oberfläche. Verwenden Sie den Griff

7.Before Lagerung, genügend Zeit für das Gerät abkühlen lassen. Immer an einem trockenen und sicheren Ort aufbewahren, außerhalb der Reichweite von Kindern.

Buy it: